EASY ARM 1+2
Psssst, the best working climate with EASY ARM 1 and 2!
Ersa supports its customers during the soldering process with the new solder fume extraction units EASY ARM 1 and EASY ARM 2. Sporting a functional design and offering useful accessories, the intelligently controlled ultra-quiet filter units clean the air from harmful substances.
The intelligent controls of the new extraction units installed over soldering stations of the i-CON series or the hybrid rework system HR 600 raise the efficiency of cleaning the process air, thereby cutting cost. Not only the rework systems i-CON 1 and 2 with serial interface, but also the flagships i-CON VARIO 2 and 4 can actively control the operation of the extraction system - the filter units operate only when soldering takes place! Aside from further reducing the already low overall noise level during extraction, this feature also cuts the cost of filters and energy: As soon as the connected soldering stations switch to the stand-by mode, the filter unit will, with a small delay in time, turn off. Energy losses due to frequent ventilation of the work area, particularly in winter, are virtually eliminated through this smart technology.
Fascinating technical solutions
Whether one-channel or dual-channel extraction - EASY ARM 1 (50 W) and EASY ARM 2 (100 W) use the identical technology: an especially quiet moving blower [max. 50 dB(A)] draws the process air contaminated with particles and gases through a three-stage filter unit, and returns it, cleaned and without disturbing blow-out noises, to the ambient environment. In both units the identical prefilters (filter class F 7) and combination filters (filter class H13 with activated carbon) remove even the smallest particles and gases from the passing air.
Each extraction connection (up to 95 m3/h) can be individually set, allowing the units to be operated at very low operating costs. The need to change a filter (the combination filter after approximately 1,500 h) is indicated by the unit, and can be done very quickly. Practical table mounts as well as a well thought out assortment of exhaust arms and nozzles optimally integrate the systems in virtually every manufacturing environment. Robust and sound insulated metal housings ensure a long s ervice life even in a rough environment.
On account of the interface provided, the fume extraction units can at all times be integrated into automatic manufacturing system such as solder robots. Customers, who do not yet own an i-CON station, can use a suitable stand-by switch at the workplace to activate/deactivate the extraction unit.