DE / EN
 

Kurtz Ersa Magazine

 
 
 
SMARTFLOW 2020

Simple secure selective soldering!

Connect, switch on, solder! With the SMARTFLOW 2020, which was presented for the first time at the SMT in Nuremberg, Ersa is extending its selective soldering portfolio, which is a leader all over the world, by a further high-performance system. With an unbeatable price/performance ratio and a utility space of less than 2.5 m², it can be integrated in the best possible way into a production environment with cell production.


Ersa SMARTFLOW 2020 - compact without compromises
Ersa SMARTFLOW 2020 - compact without compromises
 
Simply plug´n´play - no problem with the Ersa SMARTFLOW!
Simply plug´n´play - no problem with the Ersa SMARTFLOW!

In the development of the SMARTFLOW 2020, the requirements were low investments for the customer, a simple and at the same time intuitive operation and a component quality as guaranteed by high-end systems of the VERSAFLOW family. In the end, Ersa presented a system which provides the user with a favourably priced entrance into the world of automated selective soldering on the highest technical level. The new "small one" from Ersa is the obvious proof of the fact that favourably priced design and maximum quality requirements are well and truly compatible. Small, but fine, the SMARTFLOW 2020 is the ideal and flexible system for low quantities and/or small productions. The "plug and play" concept puts the users in a position to commission and to operate their SMARTFLOW without any training.

Tried and tested VERSAFLOW selective soldering technology

Watch the Ersa SMARTFLOW 2020 YouTube-Clip
Watch the Ersa SMARTFLOW 2020 YouTube-Clip

The SMARTFLOW 2020 – despite compact dimensions, the universal mask incorporation grabs the maximum component size of 508 x 508 mm (20 x 20‘‘) – works with the same tried and tested Ersa selective soldering technology of the large VERSAFLOW systems in all process steps and makes no compromises as far as quality and precision are concerned. The fluxer works with maximum positioning precision and a minimum application quantity. Process security is ensured by features like diffuser spray monitoring or a process camera. Like the VERSAFLOW product family, the SMARTFLOW 2020 has preheating over the entire surface. The lower heating has been equipped with eight sprays, which are switched in groups in order to adapt the performance to energy requirements and component size. The upper heating has been optimally matched to the lower heating – this ensures effective and reproducible through heating, even with extremely demanding components such as multi-layer or heavy mass.

Ideal start for automated selective soldering

ERSAsoft 5 with user-oriented menu navigation and PIP function for optimum overview
ERSAsoft 5 with user-oriented menu navigation and PIP function for optimum overview

The SMARTFLOW 2020 has been equipped with the completely new development of the ERSAsoft 5 machine software, which is convincing with an user-orientated surface and ultra-modern visualisation. Machine data and information can be provided individualised for the user. A further highlight is the "picture in picture" function, which provides a live picture of the soldering process parallel on the 24" touch monitor in interaction with the process observation camera.

 

Secure Investment in the Future of Electronic Production

 

With the SMARTFLOW 2020, the user has a modern selective soldering system fulfilling the highest-quality industry standards, which stakes on a tried and tested technique for maximum requirements in fluxing, preheating and soldering – be in it 3-shift operation or seven days a week. The innovative design of the system combined with low maintenance requirements and very good accessibility of the functional modules guarantees a very high availability of the soldering system.

 

Extremely low consumption figures for nitrogen, flux, solder and energy enable economic operation with low operating costs. A modern control technology permits simple operation, interlinking of the system in MES/ERP architectures, offline programming and the possibility of remote maintenance. Equipped with all these benefits, the SMARTFLOW 2020 is a secure investment in the future of electronic production – also yours! Our small compact machine provides quality like a large one. As you can expect from the market leader Ersa with more than 1,500 selective soldering systems installed all over the world!

 

 

Ersa SMARTFLOW 2020 - compact without compromises (PDF-Download) Get to know more about Ersa Selective Soldering Systems

Features Ersa SMARTFLOW 2020

 
 
 

More articles from Electronics Production Equipment

Ersa offer of coaching

2. half-year 2015

Industry 4.0

Internet of things: showcase for Ersa

Success for Ersa

… in São Paulo at the FIEE 2015
 
 

We respect your privacy

We use cookies to offer you an optimal website experience. This includes cookies that are necessary for the functionality of the site as well as third-party cookies that are only used for anonymous statistical purposes, for comfort settings or to display personalized content. You can decide for yourself which categories you want to allow. Please note that, based on your settings, not all functionalities of the site may be available anymore.

Further information as well as the option to revoke a once given consent at any time you can find in our Privacy Policy.

Manage your Cookie-Preferences

 

This cookies are essential for establishing the functionality of the website.

 

This cookies are used to analyse the user behaviour on the website. We track in exmaple the amount of visits or the duration of the visit of a specific site.